Farming Magazine - December, 2009


Skid Steers & Accessories



  • Model: S175
  • Engine: 49 hp liquid-cooled diesel
  • Operating Capacity: 1,750 pounds
  • Tipping Load: 4,076 pounds
  • Feature: Backup alarm and BICS System (Interlock)

Case IH

  • Model: 420 Series
  • Engine: 69 net hp diesel
  • Operating Capacity: 1,850 pounds
  • Tipping Load: n/a
  • Feature: Standard ROPS and self-leveling bucket

Gehl Co.

  • Model: V270 Skid Loader
  • Engine: 84 hp
  • Operating Capacity: 2,700 pounds
  • Tipping Load: n/a
  • Feature: Lift arm design for more than 130 inches of lift height


  • Model: 2056 Skid Steer Loader
  • Engine: 62 hp Deutz turbo-diesel
  • Operating Capacity: 1,900 pounds
  • Tipping Load: 3,800 pounds
  • Feature: Compact chassis as narrow as 59.7 inches wide


  • Model: PT-30
  • Engine: 32.7 hp
  • Operating Capacity: 560 pounds
  • Tipping Load: 1,600 pounds
  • Feature: Operating weight of only 2.8 pounds per square inch

The Toro Co.

  • Model: Dingo TX 525
  • Engine: 25 hp Kubota diesel
  • Operating Capacity: 553 pounds
  • Tipping Load: 1,580 pounds
  • Feature: Four-pump hydraulic system

AgNation Products

AgWrap bale wrappers and bale handlers run on small skid steers with wheel kits. Bale handlers also available for 5 or 6-foot bales.

Bair Products, Inc.

Bair Claws carbide ice and snow traction enchancers come in six sizes from 11 to 35mm. Install on all tires on skid steers, wheel loaders, ATVs and more.

Baumalight by MTB Mfg., Inc.

For low and high-flow skid steers, the Baumalight Brush Fire Mulcher MF548 mulches up to 4 inches.

Berlon Industries, LLC

Berlon Industries offers its Snow and Light Material Bucket for use on skid steers.

The BOSS Snowplow

The new Poly Power-V XT Snowplow is available in two widths: 8 feet 2 inches and 9 feet 2 inches. Features 37-inch-tall flared blade wings and more.


Bradco Trenchers are available in four models with cutting depths from 24 to 60 inches and widths of 6 to 12 inches. Tooth options: cup; shark and rock; and frost.

Cross-Tech Mfg.

Cross-Tech Mfg. offers the line of Brush Wolf Rotary Brushcutters and Timber Wolf Grapple Buckets for skid steers.

Danuser Industrial Group

Drilling machines in models ranging from 6 to 60 GPM at 1,500 to 5,000 PSI. Torque ranges from 1,039 to 8,759 foot-pounds; diameters from 4 to 48 inches.

General Equipment

The 671 DIG-R-TACH hole digging attachments from General Equipment are available with various sized augers and feature a Geroler-type hydraulic motor.

Grouser Products

Grouser Products offers the F-Series Bar Track over-the-tire tracks for skid steers, as well as the 1300 Series Dozer Blade.

Horst Welding

Offering a full line of skid steer attachments including nine bucket models, as well as blades, forks, grapples, scrapers and more.


McMillen X1475 Skid Steer Planetary Auger Drive Unit with 2-inch Hex Drive is 10-25 GPM and handles up to a 30-inch-maximum-diameter auger.

Northeast Implement

Offering Farm and Valby forestry equipment, including woodchippers, winches, log grapples, stone grapples and rigid mount grapples, all for skid steers.

RAD Technologies, Inc.

BER-VAC hydro snowblowers feature the V.A.C. Hydraulic Drive System (variable auger control). Cutting height of 26 inches in widths of 64 or 76 inches.

Road Boss

The road Boss grader is available with a skid steer attachment that allows for operations both forward and backward.

Rocky Mountain Bale Sweep LLC

The Rocky Mountain Bale Sweep will pick up and load small square bales; available in eight or 10-pack models. Built-in front step and no moving parts.

Shaver Mfg.

The hydraulic StumpBuster for skid steers features a 34-inch-diameter, .75-inch steel cutting wheel and 55-degree cutting swath.


Terex offers three different pallet fork attachments, all featuring solid forged steel tines with adjustable spacing and back spill plates.

Tube-Line Mfg. Ltd.

The Bale Boss I loader-mount square bale processor from Tube-Line Mfg. allows users to raise and process bales above gates and pens.

TrynEx Intl.

The SweepEx Mega 600 from TrynEx Intl. features a 60-inch-long mainframe, polypropylene brush sections and 11 brush rows.

Wallenstein by EMB Mfg., Inc.

The WX400 Series Wood Splitters feature a 9-inch wedge height, hands-free return, up to 31 tons of splitting force and an optional four-way splitting wedge.

Worksaver, Inc.

Worksaver’s 9-foot snow blades for skid steers feature free-floating blades with 5-degree lateral oscillation, 27-inch-high moldboard and more.

York Modern Corp.

The York Broom Model SSAB is available in 6, 7 and 8-foot widths with 32-inch convoluted brush sections. It requires 12 to 15 GPM and 1,800 to 2,250 PSI.