Farming Magazine - November, 2009


Tractors and Attachments

Aebi New England, LLC

Deutz-Fahr Agrofarm

  • Engine: Liquid-cooled, four-cylinder, 82 or 96 hp
  • Trans.: Synchroshift with 20/20 speeds or Duospeed Powershift with 40/40 speeds
  • PTO Rating: 540/540E/1,000/1,000E
  • Feature: 55-degree steering angle

Antonio Carraro America

TRH 9400

  • Engine: 85 hp diesel
  • Trans.: Four-speed hydrostatic
  • PTO Rating: 73 hp
  • Feature: Bidirectional driving

Branson Tractors

Branson 2800

  • Engine: 28 hp diesel
  • Trans.: Manual
  • PTO Rating: 24 hp
  • Feature: Turbocharged diesel engine


Versatile 280

  • Engine: Cummins 8.3-liter
  • Trans.: Powershift with 18 forward, nine reverse speeds
  • PTO Rating: 225 hp
  • Feature: Fingertip electrohydraulics

Case IH

Farmall 45A

  • Engine: 45 hp diesel
  • Trans.: Shuttle shift with eight forward, two reverse gears
  • PTO Rating: 39 hp
  • Feature: Deluxe, contoured suspension seat

John Deere

5M Series Tractors

  • Engine: 65-105 hp
  • Trans.: 12F/4R, 16 F/16R or 32F/16R
  • PTO Rating: 540 RPM
  • Feature: Available in cab or open station configurations

Kioti Tractor


  • Engine: Daedong 41 hp diesel
  • Trans.: 8/8 constant mesh shuttle
  • PTO Rating: 540 RPM rear
  • Feature: Four-wheel drive, power steering, wet disc brakes, foldable ROPS

Mahindra USA

4035 4WD

  • Engine: 40 hp
  • Trans.: 12/12 synchronized shuttle with full synchromesh
  • PTO Rating: 33 hp
  • Feature: 3,090-pound hydraulic lift capacity

Massey Ferguson

MF 1600 Series

  • Engine: 35.7 to 60 hp diesel
  • Trans.: Three-range hydrostatic, 12x12 DynaQPS, 12x12 Power Shuttle or 8x8 Synchro Shuttle
  • PTO Rating: 540 RPM
  • Feature: Steel and cast iron construction


TYM Tractors

  • Engine: 23 to 100 hp Caterpillar and Mitsubishi
  • Trans.: Standard, HST and Power Shuttle
  • PTO Rating: 540 RPM rear
  • Feature: Hydrostatic Power Steering

Bair Products, Inc.

Bair Claws carbide ice and snow traction enhancers are removable and reusable for use on tractor tires, tracks and much more.

Bergman Mfg.

The AGRi-Speed Hitch is a PTO-compatible, drawbar mount designed to ease the process of hitching/unhitching farm implements.


The Model 8900 auger is available in 2-inch hex or 2 9/16-inch round output spindles and require 10 to 30 GPM at 1,500 to 3,000 PSI.

EMB Mfg., Inc.

Wallenstein chippers, BX42 and BX63, offer a 4 and 6-inch capacity, respectively. Available in self-feed hopper or hydraulic roller feed.


Offset/inline slope mowers in two sizes: ZME 125 4-foot-1-inch wide for 18 to 30 hp tractors and ZME 155 5-foot-1-inch wide for 25-40 hp tractors.


The FFC Bale Push lifts, loads and stacks round or rectangular bales with four tines and a lifting capacity of 3,600 pounds.


The new V3004 Forestry Winch has a 6,600-pound pulling capacity, safety protection screen and bearing-mounted top pulley; for tractors from 25 to 40 hp.


Sickle bar mowers with double blade mowing system make a scissor cutting action. Mowers operate at 90 degrees above and 75 degrees below horizontal.

Grouser Products

Front-mounted dozer blades for tractors feature high lift, quick-attach and parallel lift capabilities.

H&S Mfg.

The All-Purpose Manure Spreader with vertical beaters is available in four sizes from 375 to 684 bushels. Handles liquids, pen-packed manure or sludge.

Horst Loader Attachments

The 1000 Series Snow Blade is available in widths from 54 to 78 inches, angles up to 35 degrees and features a reversible cutting edge.

Jamesway Farm Equipment

The Nutri-Jector High-Speed Injection System uses a triple toolbar with a coulter opener on the first toolbar; injector knives are stagger-mounted.

Kuhn North America, Inc.

Kuhn North America introduces its new VT Variable Chamber Round Balers; LSB Large Square Balers; and RW and SW Round and Square Bale Wrappers.

MTB Mfg.

The BAUMAlight MF860 brush mulcher has 126 carbide-tipped teeth, direct drive and pusher bar. Cutting width is 60 inches.

Northwest Tillers, Inc.

Offering a complete range of custom-built tillers for tractors from 60 to 470 hp with PTOs from 65 to 470 hp.

RAD Technologies, Inc.

Blizzard Series Snowblowers are available in six models: B48, B54, B64, B74, B84 and B94; for tractors up to 75 hp. Cutting widths from 48 to 94 inches.

Shaver Mfg.

Tractor-mount log splitters from Shaver Mfg. offer three-way flexibility and four-way split capability.

Simonsen Industries

The SMC is a stainless steel, pull-type spreader with a 50-foot spread width, 5 to 8-ton capacity and variable rate compatibility.

Star Hill Jawz

Star Hill Jawz Grabbing Tools are hydraulic, front-end attachments with two fingers that open/close for moving trees, fence posts, boulders and more.


Tomahawk Bale Shredders process and spread all sizes of square and round hay or straw bales, dry, wet or frozen, as well as silage, haylage and sawdust.


Tebben Rotary Cutters with 10-gauge formed decks feature a 40 hp gearbox, stump jumper pan, hard rubber tail wheel and more.

TrynEx Intl.

The TurfEx Groom ‘N’ Sweep broom attachment is available in two sizes and designed for mounting on tractors and other service vehicles.

Valu-Bilt Tractor Parts

Over 20,000 new and rebuilt tractor parts and accessories available for Allis Chalmers, Case IH, Ford, John Deere, Oliver, White and other brands.

Westendorf Mfg. Co., Inc.

The new Dual Changer Max allows for changing of larger dual tractor tires by one person; supports dual tires up to 900 pounds.

Worksaver, Inc.

Snow blades for tractors feature adjustable skid shoes, a 10-gauge mold board and a 3/8-inch-by-6-inch cutting edge of 1044 steel.

York Rakes

The redesigned Model RI rake is now compatible with all Category I quick hitches. Many configurations available depending on application.